PlotlyWidget.add_scatterternary

PlotlyWidget.add_scatterternary(a=None, asrc=None, b=None, bsrc=None, c=None, cliponaxis=None, connectgaps=None, csrc=None, customdata=None, customdatasrc=None, fill=None, fillcolor=None, hoverinfo=None, hoverinfosrc=None, hoverlabel=None, hoveron=None, hovertemplate=None, hovertemplatesrc=None, hovertext=None, hovertextsrc=None, ids=None, idssrc=None, legendgroup=None, line=None, marker=None, meta=None, metasrc=None, mode=None, name=None, opacity=None, selected=None, selectedpoints=None, showlegend=None, stream=None, subplot=None, sum=None, text=None, textfont=None, textposition=None, textpositionsrc=None, textsrc=None, texttemplate=None, texttemplatesrc=None, uid=None, uirevision=None, unselected=None, visible=None, row=None, col=None, **kwargs)

Add a new Scatterternary trace

Provides similar functionality to the “scatter” type but on a ternary phase diagram. The data is provided by at least two arrays out of a, b, c triplets.

Parameters

  • a – Sets the quantity of component a in each data point. If a, b, and c are all provided, they need not be normalized, only the relative values matter. If only two arrays are provided they must be normalized to match ternary<i>.sum.

  • asrc – Sets the source reference on Chart Studio Cloud for a .

  • b – Sets the quantity of component a in each data point. If a, b, and c are all provided, they need not be normalized, only the relative values matter. If only two arrays are provided they must be normalized to match ternary<i>.sum.

  • bsrc – Sets the source reference on Chart Studio Cloud for b .

  • c – Sets the quantity of component a in each data point. If a, b, and c are all provided, they need not be normalized, only the relative values matter. If only two arrays are provided they must be normalized to match ternary<i>.sum.

  • cliponaxis – Determines whether or not markers and text nodes are clipped about the subplot axes. To show markers and text nodes above axis lines and tick labels, make sure to set xaxis.layer and yaxis.layer to below traces.

  • connectgaps – Determines whether or not gaps (i.e. {nan} or missing values) in the provided data arrays are connected.

  • csrc – Sets the source reference on Chart Studio Cloud for c .

  • customdata – Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, “scatter” traces also appends customdata items in the markers DOM elements

  • customdatasrc – Sets the source reference on Chart Studio Cloud for customdata .

  • fill – Sets the area to fill with a solid color. Use with fillcolor if not “none”. scatterternary has a subset of the options available to scatter. “toself” connects the endpoints of the trace (or each segment of the trace if it has gaps) into a closed shape. “tonext” fills the space between two traces if one completely encloses the other (eg consecutive contour lines), and behaves like “toself” if there is no trace before it. “tonext” should not be used if one trace does not enclose the other.

  • fillcolor – Sets the fill color. Defaults to a half-transparent variant of the line color, marker color, or marker line color, whichever is available.

  • hoverinfo – Determines which trace information appear on hover. If none or skip are set, no information is displayed upon hovering. But, if none is set, click and hover events are still fired.

  • hoverinfosrc – Sets the source reference on Chart Studio Cloud for hoverinfo .

  • hoverlabel – plotly.graph_objects.scatterternary.Hoverlabel instance or dict with compatible properties

  • hoveron – Do the hover effects highlight individual points (markers or line points) or do they highlight filled regions? If the fill is “toself” or “tonext” and there are no markers or text, then the default is “fills”, otherwise it is “points”.

  • hovertemplate – Template string used for rendering the information that appear on hover box. Note that this will override hoverinfo. Variables are inserted using %{variable}, for example “y: %{y}”. Numbers are formatted using d3-format’s syntax %{variable:d3-format}, for example “Price: %{y:$.2f}”. https://github.com/d3/d3-3.x-api- reference/blob/master/Formatting.md#d3_format for details on the formatting syntax. Dates are formatted using d3-time-format’s syntax %{variable|d3-time- format}, for example “Day: %{2019-01-01|%A}”. https://github.com/d3/d3-time-format#locale_format for details on the date formatting syntax. The variables available in hovertemplate are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event- data. Additionally, every attributes that can be specified per-point (the ones that are arrayOk: true) are available. Anything contained in tag <extra> is displayed in the secondary box, for example “<extra>{fullData.name}</extra>”. To hide the secondary box completely, use an empty tag <extra></extra>.

  • hovertemplatesrc – Sets the source reference on Chart Studio Cloud for hovertemplate .

  • hovertext – Sets hover text elements associated with each (a,b,c) point. If a single string, the same string appears over all the data points. If an array of strings, the items are mapped in order to the the data points in (a,b,c). To be seen, trace hoverinfo must contain a “text” flag.

  • hovertextsrc – Sets the source reference on Chart Studio Cloud for hovertext .

  • ids – Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type.

  • idssrc – Sets the source reference on Chart Studio Cloud for ids .

  • legendgroup – Sets the legend group for this trace. Traces part of the same legend group hide/show at the same time when toggling legend items.

  • line – plotly.graph_objects.scatterternary.Line instance or dict with compatible properties

  • marker – plotly.graph_objects.scatterternary.Marker instance or dict with compatible properties

  • meta – Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace name, graph, axis and colorbar title.text, annotation text rangeselector, updatemenues and sliders label text all support meta. To access the trace meta values in an attribute in the same trace, simply use %{meta[i]} where i is the index or key of the meta item in question. To access trace meta in layout attributes, use %{data[n[.meta[i]} where i is the index or key of the meta and n is the trace index.

  • metasrc – Sets the source reference on Chart Studio Cloud for meta .

  • mode – Determines the drawing mode for this scatter trace. If the provided mode includes “text” then the text elements appear at the coordinates. Otherwise, the text elements appear on hover. If there are less than 20 points and the trace is not stacked then the default is “lines+markers”. Otherwise, “lines”.

  • name – Sets the trace name. The trace name appear as the legend item and on hover.

  • opacity – Sets the opacity of the trace.

  • selected – plotly.graph_objects.scatterternary.Selected instance or dict with compatible properties

  • selectedpoints – Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the unselected are turned on for all points, whereas, any other non-array values means no selection all where the selected and unselected styles have no effect.

  • showlegend – Determines whether or not an item corresponding to this trace is shown in the legend.

  • stream – plotly.graph_objects.scatterternary.Stream instance or dict with compatible properties

  • subplot – Sets a reference between this trace’s data coordinates and a ternary subplot. If “ternary” (the default value), the data refer to layout.ternary. If “ternary2”, the data refer to layout.ternary2, and so on.

  • sum – The number each triplet should sum to, if only two of a, b, and c are provided. This overrides ternary<i>.sum to normalize this specific trace, but does not affect the values displayed on the axes. 0 (or missing) means to use ternary<i>.sum

  • text – Sets text elements associated with each (a,b,c) point. If a single string, the same string appears over all the data points. If an array of strings, the items are mapped in order to the the data points in (a,b,c). If trace hoverinfo contains a “text” flag and “hovertext” is not set, these elements will be seen in the hover labels.

  • textfont – Sets the text font.

  • textposition – Sets the positions of the text elements with respects to the (x,y) coordinates.

  • textpositionsrc – Sets the source reference on Chart Studio Cloud for textposition .

  • textsrc – Sets the source reference on Chart Studio Cloud for text .

  • texttemplate – Template string used for rendering the information text that appear on points. Note that this will override textinfo. Variables are inserted using %{variable}, for example “y: %{y}”. Numbers are formatted using d3-format’s syntax %{variable:d3-format}, for example “Price: %{y:$.2f}”. https://github.com/d3/d3-3.x-api- reference/blob/master/Formatting.md#d3_format for details on the formatting syntax. Dates are formatted using d3-time-format’s syntax %{variable|d3-time- format}, for example “Day: %{2019-01-01|%A}”. https://github.com/d3/d3-time-format#locale_format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are arrayOk: true) are available. variables a, b, c and text.

  • texttemplatesrc – Sets the source reference on Chart Studio Cloud for texttemplate .

  • uid – Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions.

  • uirevision – Controls persistence of some user-driven changes to the trace: constraintrange in parcoords traces, as well as some editable: true modifications such as name and colorbar.title. Defaults to layout.uirevision. Note that other user-driven trace attribute changes are controlled by layout attributes: trace.visible is controlled by layout.legend.uirevision, selectedpoints is controlled by layout.selectionrevision, and colorbar.(x|y) (accessible with config: {editable: true}) is controlled by layout.editrevision. Trace changes are tracked by uid, which only falls back on trace index if no uid is provided. So if your app can add/remove traces before the end of the data array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a uid that stays with it as it moves.

  • unselected – plotly.graph_objects.scatterternary.Unselected instance or dict with compatible properties

  • visible – Determines whether or not this trace is visible. If “legendonly”, the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible).

  • row ('all', int or None (default)) – Subplot row index (starting from 1) for the trace to be added. Only valid if figure was created using plotly.tools.make_subplots.If ‘all’, addresses all rows in the specified column(s).

  • col ('all', int or None (default)) – Subplot col index (starting from 1) for the trace to be added. Only valid if figure was created using plotly.tools.make_subplots.If ‘all’, addresses all columns in the specified row(s).

Returns

Return type

FigureWidget

PlotlyWidget.add_scatterpolargl PlotlyWidget.add_shape